Reminder: NPTEL: Exam Registration is open now for Jan 2025 courses!

Dear Candidate,

Here is a golden opportunity for those who had previously enrolled in this course during the Jan 2024/July 2024 semester, but could not participate in the exams or were absent/did not pass the exam for this course. This course is being reoffered in Jan 2025 and we are giving you another chance to write the exam on March 22, 2025 and obtain a certificate based on NPTEL norms. Do not let go of this unique opportunity to earn a certificate from the IITs/IISc.

IMPORTANT instructions for learners - Please read this carefully 

1. The exam date for this course: March 22, 2025

2. CLICK HERE to register for the exam.

Please fill the exam form using the same Enrolled email ID & make fee payment via the form, as before.

3. Choose from the Cities where exam will be conducted: Exam Cities

4. You DO NOT have to re-enroll in the courses. 

5. You DO NOT have to resubmit Assignments OR participate in the non-proctored programming exams(if applicable) in the previous semester

6. If you do enroll in the Jan 2025 course, we will take the best average assignment scores/non-proctored programming exam(if applicable) score across the two semesters.

NOTE:

  1. Please check once if you have >= 40/100  in average assignment score and also participated and satisfied the criteria in the non-proctored programming exams(if applicable) that were conducted in Jan 2024/July 2024 to become eligible for the e-certificate, wherever applicable.

  2. If not, please submit assignments again in the Jan 2025 course and also participate in the non-proctored programming exams(if applicable) to become eligible for the e-certificate.

  3. We will not be having new assignments or unproctored exams(if applicable) in the previous semester's (Jan 2024/July 2024) course. 

RECOMMENDATION: If you want to take new assignments and an unproctored exam(if applicable) or brush up on your lessons for the exam, please enroll in the Jan 2025 course.

Click here to enroll in the current course, links are provided corresponding to the course name.

7. Exam fees: 

If you register for the exam and pay before Feb 10, 2025 - 5:00 PM, Exam fees will be Rs. 1000/- per exam.

8. 50% fee waiver for the following categories: 

Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate.

Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate. 

9. Last date for exam registration: Feb 14, 2025 - 5:00 PM (Friday). 

10. Between Feb 10, 2025 - 5:00 PM & Feb 14, 2025 - 5:00 PM late fee will be applicable.

11. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 

12.  HALL TICKET: 

The hall ticket will be available for download tentatively by 2 weeks prior to the exam date. We will confirm the same through an announcement once it is published. 

13. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 

14. Data changes: 

Last date for data changes: Feb 14, 2025 - 5:00 PM: 

We will charge an additional fee of Rs. 200 to make any changes related to name, DOB, photo, signature, SC/ST and PWD certificates after the last date of data changes.

The following 6 fields can be changed (until the form closes) ONLY when there are NO courses in the course cart. And you will be able to edit those fields only if you: - 

REMOVE unpaid courses from the cart And/or - CANCEL paid courses 

1. Do you come under the SC/ST category? * 

2. SC/ST Proof 

3. Are you a person with disabilities? * 

4. Are you a person with disabilities above 40%? 

5. Disabilities Proof 

6. What is your role? 

Note: Once you remove or cancel a course, you will be able to edit these fields immediately. 

But, for cancelled courses, refund of fees will be initiated only after 2 weeks. 

15. LAST DATE FOR CANCELLING EXAMS and getting a refund: Feb 14, 2025 - 5:00 PM 

16. Click here to view Timeline and Guideline : Guideline

Domain Certification

Domain Certification helps learners to gain expertise in a specific Area/Domain. This can be helpful for learners who wish to work in a particular area as part of their job or research or for those appearing for some competitive exam or becoming job ready or specialising in an area of study.  

 

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain: https://nptel.ac.in/domains

Outside India Candidates

Candidates who are residing outside India may also fill the exam form and pay the fees. Mode of exam and other details will be communicated to you separately.

Thanks & Regards, 

NPTEL TEAM


NPTEL: Exam Registration is open now for Jan 2025 courses!

Dear Candidate,

Here is a golden opportunity for those who had previously enrolled in this course during the Jan 2024/July 2024 semester, but could not participate in the exams or were absent/did not pass the exam for this course. This course is being reoffered in Jan 2025 and we are giving you another chance to write the exam on March 22, 2025 and obtain a certificate based on NPTEL norms. Do not let go of this unique opportunity to earn a certificate from the IITs/IISc.

IMPORTANT instructions for learners - Please read this carefully 

1. The exam date for this course: March 22, 2025

2. CLICK HERE to register for the exam.

Please fill the exam form using the same Enrolled email ID & make fee payment via the form, as before.

3. Choose from the Cities where exam will be conducted: Exam Cities

4. You DO NOT have to re-enroll in the courses. 

5. You DO NOT have to resubmit Assignments OR participate in the non-proctored programming exams(if applicable) in the previous semester

6. If you do enroll in the Jan 2025 course, we will take the best average assignment scores/non-proctored programming exam(if applicable) score across the two semesters.

NOTE:

  1. Please check once if you have >= 40/100  in average assignment score and also participated and satisfied the criteria in the non-proctored programming exams(if applicable) that were conducted in Jan 2024/July 2024 to become eligible for the e-certificate, wherever applicable.

  2. If not, please submit assignments again in the Jan 2025 course and also participate in the non-proctored programming exams(if applicable) to become eligible for the e-certificate.

  3. We will not be having new assignments or unproctored exams(if applicable) in the previous semester's (Jan 2024/July 2024) course. 

RECOMMENDATION: If you want to take new assignments and an unproctored exam(if applicable) or brush up on your lessons for the exam, please enroll in the Jan 2025 course.

Click here to enroll in the current course, links are provided corresponding to the course name.

7. Exam fees: 

If you register for the exam and pay before Feb 10, 2025 - 5:00 PM, Exam fees will be Rs. 1000/- per exam.

8. 50% fee waiver for the following categories: 

Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate.

Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate. 

9. Last date for exam registration: Feb 14, 2025 - 5:00 PM (Friday). 

10. Between Feb 10, 2025 - 5:00 PM & Feb 14, 2025 - 5:00 PM late fee will be applicable.

11. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 

12.  HALL TICKET: 

The hall ticket will be available for download tentatively by 2 weeks prior to the exam date. We will confirm the same through an announcement once it is published. 

13. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 

14. Data changes: 

Last date for data changes: Feb 14, 2025 - 5:00 PM: 

We will charge an additional fee of Rs. 200 to make any changes related to name, DOB, photo, signature, SC/ST and PWD certificates after the last date of data changes.

The following 6 fields can be changed (until the form closes) ONLY when there are NO courses in the course cart. And you will be able to edit those fields only if you: - 

REMOVE unpaid courses from the cart And/or - CANCEL paid courses 

1. Do you come under the SC/ST category? * 

2. SC/ST Proof 

3. Are you a person with disabilities? * 

4. Are you a person with disabilities above 40%? 

5. Disabilities Proof 

6. What is your role? 

Note: Once you remove or cancel a course, you will be able to edit these fields immediately. 

But, for cancelled courses, refund of fees will be initiated only after 2 weeks. 

15. LAST DATE FOR CANCELLING EXAMS and getting a refund: Feb 14, 2025 - 5:00 PM 

16. Click here to view Timeline and Guideline : Guideline

Domain Certification

Domain Certification helps learners to gain expertise in a specific Area/Domain. This can be helpful for learners who wish to work in a particular area as part of their job or research or for those appearing for some competitive exam or becoming job ready or specialising in an area of study.  

 

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain: https://nptel.ac.in/domains

Outside India Candidates

Candidates who are residing outside India may also fill the exam form and pay the fees. Mode of exam and other details will be communicated to you separately.

Thanks & Regards, 

NPTEL TEAM


Thank you for learning with NPTEL!!

Dear Learner,

Thank you for taking the course with NPTEL!!
Hope you enjoyed the journey with us.
The results for this course have been published and we are closing this course now. 
You will still have access to the contents and assignments of this course, if you click on the course name from the "Mycourses" tab on swayam.gov.in.

For any further queries please write to support@nptel.iitm.ac.in.


- Team NPTEL

Manufacturing Guidelines For Product Design : Result Published!!

                                   ***THIS IS APPLICABLE ONLY FOR EXAM REGISTERED CANDIDATES***
                            ****Please don't click on below link, if you are not registered/not present for the Exam****
                        
Dear Candidate,

The exam scores and E Certificates have been released for March 2024 Exam(s).

Step 1 - Are the results of my courses released?
Please check the Results published courses list in the below links.:-
Mar 2024 Exam - Click here

Step 2 - How to check Results?
Please login to internalapp.nptel.ac.in/. and check your exam results.
Use the same login credentials as used to register for the exam.

What's next?
Please read the pass criteria carefully and check against what you have gotten.
If you still have any issues, please report the same here. internalapp.nptel.ac.in/. We will reply within a week.

Last date to report queries: 3 days within publishing of scores.

Note :
Hard copies of certificates will not be dispatched.
The duration shown in the certificate will be based on the timeline of offering of the course in 2024, irrespective of which Assignment score that will be considered.

You can now provide your feedback by creating a post and sharing it with your friends on social media platforms. 
Here's how:

  1. Log in to your account and navigate to the "Download E-certificate" section.
  2. Next to "Download E-certificate," you'll find another tab labeled "Share your experience." Click on it.
  3. Answer the provided questions about your experience.
  4. Optionally, you can add your picture or skip this step.
  5. An AI-assisted post will be generated for you. You can share this post on your social media platforms.

Please note that this option is available only if you have passed the course and are eligible for a certificate.

Thanks and Best wishes.
NPTEL Team

Manufacturing Guidelines For Product Design : Final Feedback Form !!!

Dear students,

We are glad that you have attended the NPTEL online certification course.

We hope you found the NPTEL Online course useful and have started using NPTEL extensively.

In this regard, we would like to have feedback from you regarding our course and whether there are any improvements, you would like to suggest.
 
We are enclosing an online feedback form and would request you to spare some of your valuable time to input your observations. Your esteemed input will help us in serving you better.


We thank you for your valuable time and feedback.

Thanks & Regards,

-NPTEL Team

March 2024 NPTEL Exams - Hall Tickets Released!


***THIS ANNOUNCEMENT IS ONLY FOR THOSE WHO HAVE REGISTERED AND PAID FOR THE MARCH 2024 EXAM***


Dear Candidate,

Your Hall Ticket / admit card for the NPTEL Exam(s) in March, 2024 has been released.

You may have received an email with a link to download the Hall ticket to your registered email ID. Please refer to it for further details.

It is the responsibility of the candidate to download the hall ticket at their end. Please check your registered email ID.

Note: Requests for changes in exam city, exam center, exam date, session, or course will NOT be entertained.

Please write to support@nptel.iitm.ac.in for any further queries.

All the best for your exams!



Manufacturing Guidelines for Product Design: Week 5: Assignment 5 solution has been released!

Dear Learner,

The solution of Assignment 5 has been uploaded. Solution can be downloaded from portal under the
Week 5 unit with name 'Solution for Week 5: Assignment 5'.

You can also use the following link to directly download the solution for assignment 5:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=45&lesson=118

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

Manufacturing Guidelines for Product Design: Week 6: Assignment 6 solution has been released!

Dear Learner,

The solution of Assignment 6 has been uploaded. Solution can be downloaded from portal under the
Week 6 unit with name 'Solution for Week 6: Assignment 6'.

You can also use the following link to directly download the solution for assignment 6:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=52&lesson=120

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

Correction in Question 2 of Assignment 7

We are writing to bring to your attention an error in Question 2 of Assignment 7.

Question 2: Find the CORRECT statement(s) as per the design guidelines for Induction Welding.

Options Provided:
A) The joint line must be as close as possible to the work coil.
B) The coupling distance should remain constant.
C) The space between the work coil and the bond line should remain constant.
D) Both B and C

Correction:
All the options (A, B, and C) are correct in the question. However, mistakenly, option D has been listed as "Both B and C". The correct answer for this question should be "All of the above", and is not listed in the options.

Therefore, we are not considering this particular question for evaluation of Assignment 7.

We apologize for any confusion this may have caused.

Manufacturing Guidelines for Product Design: Week 7: Assignment 7 solution has been released!

Dear Learner,

The solution of Assignment 7 has been uploaded. Solution can be downloaded from portal under the
Week 7 unit with name 'Solution for Week 7: Assignment 7'.

You can also use the following link to directly download the solution for assignment 7:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=59&lesson=121

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

Exam Format - March, 2024!!

Dear Candidate,

****This is applicable only for the exam registered candidates****

Type of exam will be available in the list: Click Here

You will have to appear at the allotted exam center and produce your Hall ticket and Government Photo Identification Card (Example: Driving License, Passport, PAN card, Voter ID, Aadhaar-ID with your Name, date of birth, photograph and signature) for verification and take the exam in person. You can find the final allotted exam center details in the hall ticket.

The hall ticket is yet to be released. We will notify the same through email and SMS.

Type of exam: Computer based exam (Please check in the above list corresponding to your course name)

The questions will be on the computer and the answers will have to be entered on the computer; type of questions may include multiple choice questions, fill in the blanks, essay-type answers, etc.

Type of exam: Paper and pen Exam (Please check in the above list corresponding to your course name)

The questions will be on the computer. You will have to write your answers on sheets of paper and submit the answer sheets. Papers will be sent to the faculty for evaluation.

On-Screen Calculator Demo Link:

Kindly use the below link to get an idea of how the On-screen calculator will work during the exam.

https://tcsion.com/OnlineAssessment/ScientificCalculator/Calculator.html

NOTE: Physical calculators are not allowed inside the exam hall.

Thank you!

-NPTEL Team

NPTEL: Manufacturing Guidelines For Product Design: Week 8: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 8 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=66&lesson=67

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 8 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=66&assessment=115

The assignment has to be submitted on or before Wednesday March 20, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

Feedback Form Week 7 - Manufacturing Guidelines For Product Design ( noc24-me11 )

Dear Learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form. It would help us tremendously in gauging the learner experience.

Here is the link to the form : 
https://docs.google.com/forms/d/1XLNTHalwm7Vtex-q2ByQL_tqYc4h3xkMMNwj6q_9F8g/viewform

Thank you
NPTEL team

Manufacturing Guidelines for Product Design: Week 4: Assignment 4 solution has been released!

Dear Learner,

The solution of Assignment 4 has been uploaded. Solution can be downloaded from portal under the
Week 4 unit with name 'Solution for Week 4: Assignment 4'.

You can also use the following link to directly download the solution for assignment 4:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=38&lesson=113

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

Manufacturing Guidelines for Product Design: Week 3: Assignment 3 solution has been released!

Dear Learner,

The solution of Assignment 3 has been uploaded. Solution can be downloaded from portal under the
Week 3 unit with name 'Solution for Week 3: Assignment 3'.

You can also use the following link to directly download the solution for assignment 3:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=31&lesson=112

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

NPTEL: Manufacturing Guidelines For Product Design: Week 7: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 7 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=59&lesson=60

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 7 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=59&assessment=114

The assignment has to be submitted on or before Wednesday March 13, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

Feedback Form Week 6 - Manufacturing Guidelines For Product Design ( noc24-me11 )

Dear Learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form. It would help us tremendously in gauging the learner experience.

Here is the link to the form : 
https://docs.google.com/forms/d/1XLNTHalwm7Vtex-q2ByQL_tqYc4h3xkMMNwj6q_9F8g/viewform

Thank you
NPTEL team

Feedback Form Week 4 & 5 - Manufacturing Guidelines For Product Design ( noc24-me11 )

Dear Learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form. It would help us tremendously in gauging the learner experience.

Here is the link to the form : 
https://docs.google.com/forms/d/1XLNTHalwm7Vtex-q2ByQL_tqYc4h3xkMMNwj6q_9F8g/viewform

Thank you
NPTEL team

NPTEL: Manufacturing Guidelines For Product Design: Week 6: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 6 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=52&lesson=53

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 6 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=52&assessment=111

The assignment has to be submitted on or before Wednesday March 06, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

Feedback Form Week 3 - Manufacturing Guidelines For Product Design ( noc24-me11 )

Dear Learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form. It would help us tremendously in gauging the learner experience.

Here is the link to the form : 
https://docs.google.com/forms/d/1XLNTHalwm7Vtex-q2ByQL_tqYc4h3xkMMNwj6q_9F8g/viewform

Thank you
NPTEL team

Reminder: NPTEL: Exam Registration is date is extended for Jan 2024 courses!


Dear Learner, 

The exam registration for the Jan 2024 NPTEL course certification exam is extended till February 20, 2024 - 05.00 P.M.

CLICK HERE to register for the exam

Choose from the Cities where exam will be conducted: Exam Cities

Click here to view Timeline and Guideline : Guideline

For further details on registration process please refer the previous announcement in the course page.

-NPTEL Team

NPTEL: Manufacturing Guidelines For Product Design: Week 5: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 5 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=45&lesson=46

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 5 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=45&assessment=108

The assignment has to be submitted on or before Wednesday Feb 28, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

Manufacturing Guidelines for Product Design: Week 2: Assignment 2 solution has been released!

Dear Learner,

The solution of Assignment 2 has been uploaded. Solution can be downloaded from portal under the
Week 2 unit with name 'Solution for Week 2: Assignment 2'.

You can also use the following link to directly download the solution for assignment 2:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=24&lesson=110

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

Manufacturing Guidelines for Product Design: Week 1: Assignment 1 solution has been released!

Dear Learner,

The solution of Assignment 1 has been uploaded. Solution can be downloaded from portal under the
Week 1 unit with name 'Solution for Week 1: Assignment 1'.

You can also use the following link to directly download the solution for assignment 1:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=17&lesson=109

You can cross check your solutions and answers. If you have any query regarding the solution, feel free to ask.

Best wishes

Feedback Form Week 1 & 2- Manufacturing Guidelines For Product Design ( noc24-me11 )

Dear Learner

Thank you for continuing with the course and hope you are enjoying it.
We would like to know if the expectations with which you joined this course are being met and hence please do take 2 minutes to fill out our weekly feedback form. It would help us tremendously in gauging the learner experience.

Here is the link to the form : 
https://docs.google.com/forms/d/1XLNTHalwm7Vtex-q2ByQL_tqYc4h3xkMMNwj6q_9F8g/viewform

Thank you
NPTEL team

NPTEL: Manufacturing Guidelines For Product Design: Week 4: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 4 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=38&lesson=39

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 4 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=38&assessment=107

The assignment has to be submitted on or before Wednesday Feb 21, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

NPTEL: Manufacturing Guidelines For Product Design: Week 3: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 3 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=31&lesson=32

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 3 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=31&assessment=106

The assignment has to be submitted on or before Wednesday Feb 14, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

Reminder: NPTEL: Exam Registration is open now for Jan 2024 courses!

Dear Learner, 


Here is the much-awaited announcement on registering for the Jan 2024 NPTEL course certification exam. 



1. The registration for the certification exam is open only to those learners who have enrolled in the course. 

2. If you want to register for the exam for this course, login here using the same email id which you had used to enroll to the course in Swayam portal. Please note that Assignments submitted through the exam registered email id ALONE will be taken into consideration towards final consolidated score & certification. 

3. Date of exam: Mar 23, 2024 

CLICK HERE to register for the exam.

Choose from the Cities where exam will be conducted: Exam Cities


4. Exam fees: 


If you register for the exam and pay before Feb 12, 2024 - 5:00 PM, Exam fees will be Rs. 1000/- per exam.


5. 50% fee waiver for the following categories: 


Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate.


Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate. 


6. Last date for exam registration: Feb 16, 2024 - 5:00 PM (Friday). 

7. Between Feb 12, 2024 - 5:00 PM & Feb 16, 2024 - 5:00 PM late fee will be applicable.


8. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 


9. HALL TICKET: 


The hall ticket will be available for download tentatively by 2 weeks prior to the exam date. We will confirm the same through an announcement once it is published. 


10. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 


11. Data changes: 


Last date for data changes: Feb 16, 2024 - 5:00 PM: 

We will charge an additional fee of Rs. 200 to make any changes related to name, DOB, photo, signature, SC/ST and PWD certificates after the last date of data changes.


The following 6 fields can be changed (until the form closes) ONLY when there are NO courses in the course cart. And you will be able to edit those fields only if you: - 


REMOVE unpaid courses from the cart And/or - CANCEL paid courses 


1. Do you come under the SC/ST category? * 

2. SC/ST Proof 

3. Are you a person with disabilities? * 

4. Are you a person with disabilities above 40%? 

5. Disabilities Proof 

6. What is your role? 


Note: Once you remove or cancel a course, you will be able to edit these fields immediately. 

But, for cancelled courses, refund of fees will be initiated only after 2 weeks. 


12. LAST DATE FOR CANCELLING EXAMS and getting a refund: Feb 16, 2024 - 5:00 PM 


13. Click here to view Timeline and Guideline : Guideline


Domain Certification

Domain Certification helps learners to gain expertise in a specific Area/Domain. This can be helpful for learners who wish to work in a particular area as part of their job or research or for those appearing for some competitive exam or becoming job ready or specialising in an area of study.  

 

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses as per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain: https://nptel.ac.in/domains


Outside India Candidates

Candidates who are residing outside India may also fill the exam form and pay the fees. Mode of exam and other details will be communicated to you separately.


Thanks & Regards, 

NPTEL TEAM


NPTEL: Manufacturing Guidelines For Product Design: Week 2: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 2 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=24&lesson=25

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 2 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=24&assessment=104

The assignment has to be submitted on or before Wednesday Feb 07, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

NPTEL: Manufacturing Guidelines For Product Design: Week 1: Content and Assignment is live now !!

Dear students,

The lecture videos for Week 1 have been uploaded for the course Manufacturing Guidelines For Product Design. The lectures can be accessed using the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=17&lesson=18

The other lectures in this week are accessible from the navigation bar to the left. Please remember to login into the website to view contents (if you aren't logged in already).
 
Assignment for Week 1 is also uploaded and can be accessed from the following link:
https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=17&assessment=103

The assignment has to be submitted on or before Wednesday Feb 07, 2024 23:59 IST.
 
As we have done so far, please use the discussion forums if you have any questions on this module.

Happy learning
NPTEL team

Manufacturing Guidelines For Product Design: Week 0 : Assignment 0 released !

Dear Students,

We welcome you all to the course Manufacturing Guidelines For Product Design. The Week 0 : Assignment 0 has been released which is only for your practice purpose; the marks obtained in this assignment will not be considered in the final assessment Score.

You can find the assignment in the "Week 0" tab on the left-hand side of your screen OR Click on Below Link 

Assignment URL: https://onlinecourses.nptel.ac.in/noc24_me11/unit?unit=16&assessment=102

For any queries/doubts please feel free write to us on "Ask a Question" tab.

Thanks & Regards,

NPTEL TEAM

NPTEL: Exam Registration is open now for Jan 2024 courses!

Dear Learner, 


Here is the much-awaited announcement on registering for the Jan 2024 NPTEL course certification exam. 



1. The registration for the certification exam is open only to those learners who have enrolled in the course. 

2. If you want to register for the exam for this course, login here using the same email id which you had used to enroll to the course in Swayam portal. Please note that Assignments submitted through the exam registered email id ALONE will be taken into consideration towards final consolidated score & certification. 

3. Date of exam: Mar 23, 2024 

CLICK HERE to register for the exam.

Choose from the Cities where exam will be conducted: Exam Cities


4. Exam fees: 


If you register for the exam and pay before Feb 12, 2024 - 5:00 PM, Exam fees will be Rs. 1000/- per exam.


5. 50% fee waiver for the following categories: 


Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate.


Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate. 


6. Last date for exam registration: Feb 16, 2024 - 5:00 PM (Friday). 

7. Between Feb 12, 2024 - 5:00 PM & Feb 16, 2024 - 5:00 PM late fee will be applicable.


8. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 


9. HALL TICKET: 


The hall ticket will be available for download tentatively by 2 weeks prior to the exam date. We will confirm the same through an announcement once it is published. 


10. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 


11. Data changes: 


Last date for data changes: Feb 16, 2024 - 5:00 PM: 

We will charge an additional fee of Rs. 200 to make any changes related to name, DOB, photo, signature, SC/ST and PWD certificates after the last date of data changes.


The following 6 fields can be changed (until the form closes) ONLY when there are NO courses in the course cart. And you will be able to edit those fields only if you: - 


REMOVE unpaid courses from the cart And/or - CANCEL paid courses 


1. Do you come under the SC/ST category? * 

2. SC/ST Proof 

3. Are you a person with disabilities? * 

4. Are you a person with disabilities above 40%? 

5. Disabilities Proof 

6. What is your role? 


Note: Once you remove or cancel a course, you will be able to edit these fields immediately. 

But, for cancelled courses, refund of fees will be initiated only after 2 weeks. 


12. LAST DATE FOR CANCELLING EXAMS and getting a refund: Feb 16, 2024 - 5:00 PM 


13. Click here to view Timeline and Guideline : Guideline


Domain Certification

Domain Certification helps learners to gain expertise in a specific Area/Domain. This can be helpful for learners who wish to work in a particular area as part of their job or research or for those appearing for some competitive exam or becoming job ready or specialising in an area of study.  

 

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses as per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain: https://nptel.ac.in/domains


Outside India Candidates

Candidates who are residing outside India may also fill the exam form and pay the fees. Mode of exam and other details will be communicated to you separately.


Thanks & Regards, 

NPTEL TEAM


NPTEL: Exam Registration is open now for Jan 2024 courses!

Dear Learner, 


Here is the much-awaited announcement on registering for the Jan 2024 NPTEL course certification exam. 



1. The registration for the certification exam is open only to those learners who have enrolled in the course. 

2. If you want to register for the exam for this course, login here using the same email id which you had used to enroll to the course in Swayam portal. Please note that Assignments submitted through the exam registered email id ALONE will be taken into consideration towards final consolidated score & certification. 

3. Date of exam: Mar 23, 2024 

CLICK HERE to register for the exam.

Choose from the Cities where exam will be conducted: Exam Cities


4. Exam fees: 


If you register for the exam and pay before Feb 12, 2024 - 5:00 PM, Exam fees will be Rs. 1000/- per exam.


5. 50% fee waiver for the following categories: 


Students belonging to the SC/ST category: please select Yes for the SC/ST option and upload the correct Community certificate.


Students belonging to the PwD category with more than 40% disability: please select Yes for the option and upload the relevant Disability certificate. 


6. Last date for exam registration: Feb 16, 2024 - 5:00 PM (Friday). 

7. Between Feb 12, 2024 - 5:00 PM & Feb 16, 2024 - 5:00 PM late fee will be applicable.


8. Mode of payment: Online payment - debit card/credit card/net banking/UPI. 


9. HALL TICKET: 


The hall ticket will be available for download tentatively by 2 weeks prior to the exam date. We will confirm the same through an announcement once it is published. 


10. FOR CANDIDATES WHO WOULD LIKE TO WRITE MORE THAN 1 COURSE EXAM:- you can add or delete courses and pay separately – till the date when the exam form closes. Same day of exam – you can write exams for 2 courses in the 2 sessions. Same exam center will be allocated for both the sessions. 


11. Data changes: 


Last date for data changes: Feb 16, 2024 - 5:00 PM: 

We will charge an additional fee of Rs. 200 to make any changes related to name, DOB, photo, signature, SC/ST and PWD certificates after the last date of data changes.


The following 6 fields can be changed (until the form closes) ONLY when there are NO courses in the course cart. And you will be able to edit those fields only if you: - 


REMOVE unpaid courses from the cart And/or - CANCEL paid courses 


1. Do you come under the SC/ST category? * 

2. SC/ST Proof 

3. Are you a person with disabilities? * 

4. Are you a person with disabilities above 40%? 

5. Disabilities Proof 

6. What is your role? 


Note: Once you remove or cancel a course, you will be able to edit these fields immediately. 

But, for cancelled courses, refund of fees will be initiated only after 2 weeks. 


12. LAST DATE FOR CANCELLING EXAMS and getting a refund: Feb 16, 2024 - 5:00 PM 


13. Click here to view Timeline and Guideline : Guideline


Domain Certification

Domain Certification helps learners to gain expertise in a specific Area/Domain. This can be helpful for learners who wish to work in a particular area as part of their job or research or for those appearing for some competitive exam or becoming job ready or specialising in an area of study.  

 

Every domain will comprise Core courses and Elective courses. Once a learner completes the requisite courses as per the mentioned criteria, you will receive a Domain Certificate showcasing your scores and the domain of expertise. Kindly refer to the following link for the list of courses available under each domain: https://nptel.ac.in/domains


Outside India Candidates

Candidates who are residing outside India may also fill the exam form and pay the fees. Mode of exam and other details will be communicated to you separately.


Thanks & Regards, 

NPTEL TEAM


Manufacturing Guidelines For Product Design: Welcome to NPTEL Online Course - Jan 2024!!

Dear Learners
 
Welcome to SWAYAM-NPTEL Online Courses and Certification!
 
Thank you for signing up for our online course. We wish you an enjoyable and informative learning experience.
 
This a 8 Weeks course will begin on Jan 22, 2024 When content is released on the portal, you will get an email alerting you.

CONTENT AND ASSIGNMENTS
 
  • Every week, about 2.5 to 4 hours of videos containing content by the Course instructor will be released along with an assignment based on this. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning and doing well in the course. This will be done week on week through the duration of the course.
  • Please do the assignments yourself and even if you take help, kindly try to learn from it. These assignments will help you prepare for the final exams. Plagiarism and violating the Honor Code will be taken very seriously if detected during the submission of assignments.

ANNOUNCEMENT AND DISCUSSION GROUPS TO CLEAR DOUBTS:

  • The announcement group - will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets, etc.
  • The discussion forum (Ask a question tab on the portal) - is for everyone to ask questions and interact. Anyone who knows the answers can reply to anyone's post and the course instructor/TA will also respond to your queries.
  • Please make maximum use of this feature as this will help you learn much better.
  • If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section

TO GET A CERTIFICATE - PROCESS, AND CRITERIA:
  • The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
  • The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
  • Date and Time of Exams: March 23, 2024 Morning session 9am to 12 noon; Afternoon Session 2 pm to 5 pm.
  • Registration URL: Announcements will be made when the registration form is open for registrations.
  • The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
  • Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.
  • Once again, thanks for your interest in our online courses and certification. Happy learning.

- NPTEL team

Manufacturing Guidelines For Product Design: Welcome to NPTEL Online Course - Jan 2024!!

Dear Learners
 
Welcome to SWAYAM-NPTEL Online Courses and Certification!
 
Thank you for signing up for our online course. We wish you an enjoyable and informative learning experience.
 
This a 8 Weeks course will begin on Jan 22, 2024 When content is released on the portal, you will get an email alerting you.

CONTENT AND ASSIGNMENTS
 
  • Every week, about 2.5 to 4 hours of videos containing content by the Course instructor will be released along with an assignment based on this. Please watch the lectures, follow the course regularly and submit all assessments and assignments before the due date. Your regular participation is vital for learning and doing well in the course. This will be done week on week through the duration of the course.
  • Please do the assignments yourself and even if you take help, kindly try to learn from it. These assignments will help you prepare for the final exams. Plagiarism and violating the Honor Code will be taken very seriously if detected during the submission of assignments.

ANNOUNCEMENT AND DISCUSSION GROUPS TO CLEAR DOUBTS:

  • The announcement group - will only have messages from course instructors and teaching assistants - regarding the lessons, assignments, exam registration, hall tickets, etc.
  • The discussion forum (Ask a question tab on the portal) - is for everyone to ask questions and interact. Anyone who knows the answers can reply to anyone's post and the course instructor/TA will also respond to your queries.
  • Please make maximum use of this feature as this will help you learn much better.
  • If you have any questions regarding the exam, registration, hall tickets, results, queries related to the technical content in the lectures, any doubts in the assignments, etc can be posted in the forum section

TO GET A CERTIFICATE - PROCESS, AND CRITERIA:
  • The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
  • The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
  • Date and Time of Exams: March 23, 2024 Morning session 9am to 12 noon; Afternoon Session 2 pm to 5 pm.
  • Registration URL: Announcements will be made when the registration form is open for registrations.
  • The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
  • Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.
  • Once again, thanks for your interest in our online courses and certification. Happy learning.

- NPTEL team