Analog Electronic Circuits - IITKGP

By Prof. Pradip Mandal | IIT Kharagpur

Learners enrolled: 3437 | Exam registration: 204

ABOUT THE COURSE:

This course on Analog Electronic Circuits has been designed primarily as a core course for undergraduate students and, as a refresher course for master level students and circuit designers working in industry. It starts with basic circuit components and circuit concepts and then, gradually moves to practical building blocks of analog electronic systems. In this course, a serious attempt has been made to make a balance between theory and practice so that the discussed circuits can be constructed in an undergraduate level laboratory class and their measured performance can be easily compared with the analytically predicted performance. It helps to build confidence on theory.

The other important feature of this course is, it covers both BJT based circuits and MOSFET based circuits parallel so that similarities and performance differences between these two classes of circuits are understandable. Moreover, the BJT based circuits discussed here can be easily constricted on bread board to verify their characteristic through measurement. On the other hand, analysis of the MOSFET based circuits provides the necessary foundation for Analog VLSI circuit/system design, a next level course in Microelectronics and VLSI Design.

The above mentioned two features make the proposed course unique with respect to the existing NPTEL courses on this topic. Further, the content of the proposed course is well aligned to the content of Analog Electronics course (EC09) under “AICTE Model Curriculum for undergraduate degree in Electronics and Communication Engineering (Engineering & Technology) published in 2018

INTENDED AUDIENCE : B.E/B.Tech,B.Sc in Electrical and Electronics discipline

PRE-REQUISITES : Electrical technology and, Semiconductor Devices

SUPPORT INDUSTRY : Semiconductor companies such as, Intel, TI, Analog Devices, NXP,
ST-microelectronics, Infineon

Summary

Course Status :	Ongoing
Course Type :	Core
Language for course content :	English
Duration :	12 weeks
Category :	Electrical, Electronics and Communications Engineering Control and Instrumentation VLSI design
Credit Points :	3
Level :	Undergraduate
Start Date :	22 Jul 2024
End Date :	11 Oct 2024
Enrollment Ends :	05 Aug 2024
Exam Registration Ends :	16 Aug 2024
Exam Date :	03 Nov 2024 IST

Note: This exam date is subject to change based on seat availability. You can check final exam date on your hall ticket.

Page Visits

Course layout

Week 1 : Introduction of this course; Objective of the course; Revisit to pre-requisite topics; Starting with simple diode circuit and its analysis.

Week 2 : Revisiting BJT - operation and characteristic equations. Revisiting MOSFET - operation and characteristic equations

Week 3 : Analysis of simple non-linear circuits (containing one transistor) and introducing the notion of signal amplification. Input-output transfer characteristic of a non-linear circuit. Linearization of input-output transfer characteristic of a non-linear circuit and introducing the notion of small signal equivalent circuit. Small signal models of transistors.

Week 4 : Amplifier models (equivalent circuits): voltage amplifier, current amplifier, trans-conductance amplifier and trans-resistance amplifier. Cascading of multiple amplifiers. Common emitter (CE) amplifier – biasing, operation, analysis numerical examples and design guidelines. Common source (CS) amplifier – biasing, operation, analysis, Numerical examples and design guidelines.

Week 5 : Frequency response of CE and CS amplifiers. Frequency response of CE and CS amplifiers considering High frequency models of BJT and MOSFET. Limitations of CE/CS amplifiers and hence the need of buffers.

Week 6 : Common Collector (CC) and Common Drain (CD) amplifiers– biasing, operation, analysis and design. Common Base (CB) and Common Gate (CG) amplifier – biasing, operation, analysis and design.

Week 7 : Multi transistor Amplifiers (operation and analysis): CE-CC; CS-CD; CC-CC; Darlington pair; Cascode amplifiers (CS-CB and CS-CG); Amplifier with active load

Week 8 : Single-ended signaling vs. differential signaling, Differential amplifier: Basic structure and principle of operation, analysis for differential mode gain, common mode gain, ICMR and output swing

Week 9 : Current mirror- operation and analysis, Use of current mirror as bias circuit in amplifiers such as in CE/CS, CC/CD, CB/CG and Differential amplifier. Use of current mirror as signal mirror.

Week 10 : Feedback system: Basic feedback theory; Four different feedback configurations and their characteristics. Effects of feedback on frequency response of an amplifier. Application of feedback in practical circuits.

Week 11 : Oscillation in feedback system and oscillation criterion, Stability analysis of a feedback system, Two-stage differential amplifier and its stability analysis in feedback configuration.

Week 12 : Oscillator: Phase-shift and LC based sinusoidal oscillators. Comparator. Square wave generator (Optional) : Power efficiency of an amplifier, Different modes of operation of amplifiers and their power efficiency: Class A, Class B, Class AB and Class C

Books and references

1. J. Millman and C. Halkias, Integrated Electronics: Analog and Digital Circuits and Systems, McGraw Hill, 1985.
2. Paul R. Gray and Robert G.Meyer, Analysis and Design of Analog Integrated Circuits, John Wiley, 3rd Edition Course
3. P. Horowitz and W. Hill, The Art of Electronics, 2nd edition, Cambridge University Press, 1989.
4. A.S. Sedra and K.C. Smith, Microelectronic Circuits,
5. Fundamentals of Microelectronics by Behzad Razhavi, Wiley 2013
6. J. Millman and A. Grabel, Microelectronics, 2nd edition, McGraw Hill, 1988.

Instructor bio

Prof. Pradip Mandal

IIT Kharagpur

Pradip Mandal is a professor in the Electronics and Electrical Communication Engineering Department of IIT Kharagpur. He received his PhD degree from Indian Institute of Science,Bangalore in 1999. He has more than seven years of hands-on design experience from three different IC design companies. His research interest is primarily on Analog VLSI circuit design and automation. He has taught a course on Analog Electronic Circuits more than a decade at IIT Kharagpur. Out of his teaching experience, he has developed the course material for the proposed course.

Course certificate

The course is free to enroll and learn from. But if you want a certificate, you have to register and write the proctored exam conducted by us in person at any of the designated exam centres.
The exam is optional for a fee of Rs 1000/- (Rupees one thousand only).
Date and Time of Exams: 03 November 2024 Morning session 9am to 12 noon; Afternoon Session 2pm to 5pm.
Registration url: Announcements will be made when the registration form is open for registrations.
The online registration form has to be filled and the certification exam fee needs to be paid. More details will be made available when the exam registration form is published. If there are any changes, it will be mentioned then.
Please check the form for more details on the cities where the exams will be held, the conditions you agree to when you fill the form etc.

CRITERIA TO GET A CERTIFICATE

Average assignment score = 25% of average of best 8 assignments out of the total 12 assignments given in the course.
Exam score = 75% of the proctored certification exam score out of 100

Final score = Average assignment score + Exam score

YOU WILL BE ELIGIBLE FOR A CERTIFICATE ONLY IF AVERAGE ASSIGNMENT SCORE >=10/25 AND EXAM SCORE >= 30/75. If one of the 2 criteria is not met, you will not get the certificate even if the Final score >= 40/100.

Certificate will have your name, photograph and the score in the final exam with the breakup.It will have the logos of NPTEL and IIT Kharagpur .It will be e-verifiable at nptel.ac.in/noc.

Only the e-certificate will be made available. Hard copies will not be dispatched.

Once again, thanks for your interest in our online courses and certification. Happy learning.

- NPTEL team

SWAYAM Helpline / Support